How many meters in one roll of wallpaper

Wallpapers - one of the most popular materials for wall decoration in residential areas. With proper use, they allow you to create both stylish and cozy space. At first glance, wallpaper the walls - simple. And indeed, it does not require special education and training. However, it is impossible to do without certain knowledge. Otherwise, during the installation process, unexpected surprises may occur. And first of all you need to decide which wallpaper and in what quantity is best suited for a particular room. To answer these questions, it is necessary to understand the types of material, calculate - what area can be covered with a single roll. You will need parameters such as width, length of the finished fabric and the dimensions of the room. Finding out how many meters in a roll of wallpaper, it will be possible to determine the required amount of material.

Wallpaper classification and size

The choice of a specific type of wallpaper depends on the place of their application and on the financial possibilities of the buyer. Consider the main options:

  • paper - single-layer or two-layer cloths having a smooth or corrugated front side with or without an image. Their relative advantage is low cost. In fact, they are much faster come into disrepair, because not sufficiently resistant to mechanical stress, the influence of moisture and light. Such wallpaper is difficult to stick exactly, they have to be changed frequently. Therefore, the savings in their purchase is unjustified. The width of such products is most often equal to 53 cm. There are also paper wallpapers that serve as the basis for painting. Their width can be 106 cm;
  • vinyl - represented by foamed or heavy vinyl, silk-screen printing, flat vinyl, artificial leather. Available in sizes 53 and 106 cm. The bottom layer can be paper or non-woven. Upper - vinyl protects the walls from moisture and fungus;
  • textile - duplex, the top layer of which is made of fabric - velveteen, felt, velor, and paper or fabric is taken as the basis;
  • metal - made of thin sheet metal, which is pasted on a paper base, and then subjected to embossing. They have vapor impermeability, therefore they are not suitable for surfaces that are not capable of absorbing moisture;
  • cork - they consist of a paper base and the thinnest face layer of natural cork. Such wallpapers are breathable environmentally friendly material. They do not electrify and do not magnetic dust.

Width

Most often there are wallpapers with the following widths:

  1. 53 cm - they are called half meter. Products of this size are in the range of any manufacturer, it is considered the most traditional, popular and running.
  2. 106 cm - wide "meter" wallpaper. They greatly facilitate the process of gluing and allow you to create a coating with a minimum number of seams. Usually have a non-woven base.
  3. 70 cm is a popular size of European origin. As a rule, this width is found in imported products.

Length

The length of the wallpaper is even simpler. Here you can select one main standard and a couple more. Most often, the length of the roll is 10.05 m. Nevertheless, in the wallpaper for painting, the 53-meter length of the roll will be 15 m, and by 106 cm-25 m.

Square meters - area

To calculate how many squares in a roll, you need to multiply its width by the number of meters. As a result, we obtain the following results:

  • with a roll width of 53 cm and a web length of 10.05 m, the area is approximately 5.3 m2;
  • with the same width and length of 15 m - the footage will be equal to 7.95 m2;
  • with a width of 106 and a length of 25 m - 25 m2.

Designation on a roll

As a rule, when choosing a wallpaper, the focus is on their obvious characteristics - color, prints, texture, production material. The appearance of the finish plays a leading role, as it affects the design of the room. In addition, there is an impressive list of equally important parameters that also need to be considered. In order to designate certain characteristics, manufacturers use special markings. Understanding these icons is easy. With their help indicate:

  • the resistance of the wallpaper to the effects of ultraviolet radiation, moisture, detergents;
  • method of applying glue - on the wall or on the canvas;
  • the location of the wallpaper on the wall, the method of docking paintings and fitting patterns;
  • the ability of the material to dismantle;
  • information about the additional advantages of wall covering.

Lightfastness

UV resistance is the main parameter that should be taken into account by the occupants of the rooms located on the sunny side. For its designation use the icon in the form of the sun. Prolonged exposure to bright rays will inevitably lead to fading of colors, the appearance of yellowness. Therefore, wallpaper for such a room should have a maximum degree of light resistance. For rooms where the sun is not such a frequent visitor, a finish with less pronounced light-shielding properties will do. There are several levels, each of which corresponds to the degree of wallpaper resistance to fading:

  • moderate - half of the sun - the finish recommended for darkened rooms quickly burns out, loses its original colors;
  • relative - wallpaper is partially UV resistant, intended for use in rooms on the north side;
  • light resistant - finish suitable for use on the sunny side;
  • a very high level of light fastness - paints remain bright for a long time with prolonged exposure to the rays;
  • the highest degree of sun protection - the colors are preserved in their original form during the entire period of operation, despite the long-term influence of the sun.

Want to paint on the wallpaper does not fade soon after the repair? Choose the type of material that will fit the room.

Moisture resistance

Resistance to moisture - an equally important quality of finishing sheets for walls. To indicate the degree of moisture resistance, wave icons are used. The more of them, the higher the level of protection. If the picture includes a brush besides the wave, the wallpaper can be not only washed, but also cleaned. It is very important to understand how the material will behave during contact with glue, water. If there is no protection, be prepared for excessive disintegration during installation. Handle such wallpaper should be very carefully. There is always a danger to damage the surface layer of the material, to spoil its appearance. Such a finish is a super budget option. But its inability to tolerate the effects of moisture can result in over-plan spending on the restoration of individual sections of the coating or its full replacement.

Apply such wallpaper can only be in dry rooms. In the kitchen and bathroom, they are completely irrelevant. It requires a thorough protection, which will make it possible to conduct wet processing, using detergents and cleaners.

To wallpaper served you faithfully for many years, you need:

  • select them taking into account the degree of humidity of the repaired premises;
  • take care of the coating in accordance with the manufacturer's recommendations.

Method of sticking

Different types of wallpaper require a special, individual approach to the process of sticking. There are various techniques of mounting cloths, which also have their own labeling. Before applying the adhesive, you should make sure that you choose the right technique for fixing the coating. There are several ways of sticking material on the walls:

  • Wallpaper remains dry, and the glue is evenly distributed on the glued surface. The composition should be applied to the part of the wall that corresponds to the size of the strip. Immediately handle a large area is meaningless - as long as you stick one canvas, the remaining sections will have time to dry.

You will have to coat the wall again, wasting material;

  • glue is applied on wallpaper only. In case you are dealing with non-primed walls, and the adhesion is not large enough, it is worth noting the strip, but also the surface of the wall;
  • finishing with self-adhesive wallpaper. To fix this coating on the wall, it is enough to wet it with a damp sponge or cloth;
  • installation with special glue.

Pattern fits

There is no difficulty in sticking monochrome or wallpaper without a pronounced pattern. Cloths fit arbitrarily, thus avoiding unnecessary waste of material. It is quite another thing to dock the strips with a pattern so that the individual elements merge into a single composition. The variegated height of the walls in the apartments does not allow mass-produced such wallpaper that does not need to be customized. Therefore, in order for the pattern to match, it is necessary to cut off a certain part of each new strip. Manufacturers care about consumers and put a label, which displays the step pattern and the height to which you want to shift each canvas. There are various ways to dock the material:

  • without docking - the canvas is arranged in a row without combining the pattern - relevant for plain smooth and textured wallpaper;
  • at one level - the element of the pattern is combined at the same height with the next;
  • with a stepped offset - the pattern is shifted to half the height of the neighboring one - a number indicating the height of the repeat is marked on the marking.

There is a so-called inconspicuous method of docking, in which the sheets of wallpaper overlap by 40-60 mm, after which the excess is cut off with a knife.

Durability in cleaning and washing

Wallpapers in different ways tolerate exposure to detergents and cleaning accessories. There are the following types of material according to the degree of resistance to washing and cleaning:

  • intended only for dry cleaning - do not tolerate moisture, it is recommended to use a soft brush to remove dirt;
  • wear-resistant - cleaning can be done with a wet sponge or brush;
  • moisture resistant - can be used in rooms with high humidity. This wallpaper does not hurt short-term contact with a damp cloth or sponge, but intensive washing is contraindicated for them;
  • washable - the material is well tolerated by water in combination with low-active detergents;
  • superwashable - it is assumed the use of any means for washing and cleaning, including aggressive ones. Most relevant for use in the kitchen. With such wallpaper, you can remove fatty contamination with high quality and safe, and most importantly, without consequences for the integrity of the finish;
  • resistant to friction - intensive cleaning with detergents and a brush is allowed.

Sticking direction

In this case, the marking signals the way the paintings are placed on the wall. One arrow indicates that the wallpaper should be placed strictly in one direction. Counter arrows indicate that each subsequent strip must be rotated 180 °. Another occurring marking is three arrows looking in one direction. Bands with this method of sticking are located strictly in a given direction.

Dismantling

The designations on the wallpaper help not only to choose the right coating and stick it, but also later it is easy to remove. The technology of dismantling depends on the quality of the fabric and the material of manufacture.

Variants of signs informing about how to remove wallpaper from the walls:

  1. Complete removal - the sheets are removed entirely without effort and the use of additional funds.
  2. Partial removal - removed with a scraper and wetted with water.
  3. Removal after wetting - before trying to tear off the strip, you need to thoroughly wet it.

How to calculate the right amount of rolls

So, all the nuances of various wallpapers are listed, it's the turn of calculations. To find out how many rolls will be needed for repair, it is necessary to calculate the perimeter of the room, its height, and make a calculation taking into account the length and width of the panels. Do not forget about the height of the room, rapport size, offset pitch, bottom and top allowances. For calculations, you can resort to the following tools:

  • interactive calculator - online program, which entered data online. It is recommended to give preference to more complex meters that use the maximum number of room and material characteristics for calculations. When choosing a program, pay attention to the units that it uses - they must be the same for all parameters - m, cm or mm. This is the only way to rely on the correct processing of this data;
  • special reference tables - they contain the results of calculations in accordance with the parameters of the rolls and the dimensions of the room. The tables do not take into account the rapport of the wallpaper, so the height characteristic needs to be adjusted with this parameter in mind, additions to the curvature of the walls and allowances;
    If you do not trust the finished tools, calculations can be made manually. Use the following algorithm:
  • we recognize the perimeter of the room, after measuring the width of each of the walls;
  • we determine the height of the canvases + margin for allowances, rapport and offset patterns;
  • we calculate the number of cuts from one roll - divide its length by the height of the strip;
  • find out how many cuts you need - multiply the perimeter of the room by the width of the wallpaper;
  • count the required number of rolls - divide the number of lanes by the number of cuts from one roll. Data is rounded upwards.

How to find out the area of ​​the room

Calculate the required number of rolls can be another way - by the area of ​​the room. Determine the total area:

  • walls (in calculations we do not forget about rapport, displacement and allowances);
  • window and door openings.

The difference between the first and second indicators and will be the area for pasting. We divide this value by
the area of ​​the roll and get the desired value.

Conclusion

When buying wallpaper there is always a risk to miscalculate. Our tips will help you to purchase the required amount of material and not to make extra expenses.

Watch the video: How many wallpaper rolls needed (March 2024).

Leave Your Comment